SICK microScan3 EtherNet/IP - Page 162

microScan3 Core –
E
therNet/IP™
microScan3 Pro –
EtherNet/IP™
Length of cable ≤ 5 m ≤ 5 m
Fieldbus/industrial network
Type of fieldbus integration EtherNet/IP
Connection type M12 female connector, 4-pin,
D
-coded
Female connector, M12, 4-pin,
D-coding
Supported protocol versions
•
C
ommon Industrial Protocol: The CIP Networks Library Vol‐
ume 1, Edition 3.20
•
EtherNet/IP™: The CIP Networks Library Volume 2, Edition
1.21
•
CIP Safety™: The CIP Networks Library Volume 5, Edition
2.13
Electrical data
T
able 38: Electrical data
microScan3 Core –
E
therNet/IP™
microScan3 Pro –
EtherNet/IP™
Operating data
Protection class III (IEC 61140) III (IEC 61140)
Supply voltage U
V
24 V DC (16.8 V … 30 V DC)
(SEL
V/PELV)
1)
24 V DC (16.8 V to 30 V DC)
(SELV/PELV)
1)
Residual ripple ± 5%
2)
Start-up current at 24 V ≤ 3 A
Current consumption at 24 V
Operation ≤ 0.45 A (typ. 0.3 A) ≤ 0.45 A (typ. 0.3 A)
Sleep mode Typ. 0.29 A
Power consumption
Operation ≤ 11 W (typ. 7.2 W)
Sleep mode Typ. 7 W
Power-up delay ≤ 45 s (typ. 20 s) ≤ 45 s (typ. 20 s)
1)
The power supply unit must be able to jumper a brief power failure of 20 ms as specified in
IE
C 60204-1. Suitable power supply units are available as accessories from SICK.
2)
The voltage level must not fall below the specified minimum voltage.
Mechanical data
T
able 39: Mechanical data
microScan3 Core –
EtherNet/IP™
microScan3 Pro –
EtherNet/IP™
Dimensions (without system
plug, W × H × D)
112 mm × 150.8 mm × 111.1 mm
Weight (including system
plug)
1.45 kg
Housing material Aluminum
Housing color RAL 9005 (black) and RAL 1021 (colza yellow)
Optics cover material Polycarbonate
Optics cover surface Outside with scratch-resistant coating
13 TECHNICAL DATA
162
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/15ZT/2019-11-14 | SICK
Subject to change without notice