microScan3 Core –
E
therNet/IP™
microScan3 Pro –
EtherNet/IP™
Distance between center
point of scan plane and top
edge of the housing
40 mm
Multiple sampling 2 … 16
4)
2 to 16
4)
1)
Protective field resolution 60 mm only available for devices with max. protective field range of 9.0 m.
2)
Devices with a max. protective field range of 4.0 m and devices with max. protective field range of 5.5 m.
3)
Devices with a max. protective field range of 9.0 m
4)
Can be adjusted collectively for all fields or individually for each field.
Safety-related parameters
T
able 36: Safety-related parameters
microScan3 Core –
E
therNet/IP™
microScan3 Pro –
EtherNet/IP™
Type Type 3 (IEC 61496)
Safety integrity level SIL 2 (IEC 61508) SIL 2 (IEC 61508)
SIL claim limit SILCL 2 (IEC 62061) SILCL 2 (IEC 62061)
Category Category 3 (ISO 13849-1)
Performance level PL d (ISO 13849-1) PL d (ISO 13849-1)
PFH
D
(me
an probability of a
dangerous failure per hour)
8 × 10
–8
T
M
(mis
sion time) 20 years (ISO 13849-1) 20 years (ISO 13849-1)
Safe status when a fault
oc
curs
The safety outputs via the network are logic 0.
Interfaces
T
able 37: Interfaces
microScan3 Core –
EtherNet/IP™
microScan3 Pro –
EtherNet/IP™
Safety outputs via network
Quantity
Devices with a max. protec‐
t
ive field range of 4.0 m
4 8
Devices with a max. protec‐
t
ive field range of 5.5 m
4 8
Devices with a max. protec‐
tive field range of 9.0 m
4
Duration of OFF state ≥ 80 ms ≥ 80 ms
Automatic restart after 2 s … 60 s (can be configured) 2 s to 60 s (can be configured)
Voltage supply
Connection type Male connector, M12, 4-pin, A-coding
Length of cable (power supply unit tolerance ± 5%)
Length of cable with wire
cr
oss-section 0.25 mm
²
≤ 100 m ≤ 100 m
Configuration and diagnostic interface
Type of interface USB 2.0
Connection type USB 2.0 mini-B (female connector)
Transmission rate ≤ 12 Mbit/s ≤ 12 Mbit/s
TECHNICAL DATA 13
8020200/15ZT/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
161
Subject to change without notice