SICK microScan3 EtherNet/IP - Page 178

Object instance
Attribute ID Access rule Name Data type Description
Dec Hex
1 0x01 Get PackageSerial‐
N
umber
UDINT Serial number (device with system plug)
2 0x02 Get PackageOrder‐
Number
SHORT_STRING Part number (device with system plug)
3 0x03 Get DeviceSerialNum‐
ber
UDINT Serial number (device without system plug)
4 0x04 Get DeviceOrderNum‐
ber
SHORT_STRING Part number (device without system plug)
5 0x05 Get SysplugSerialNum‐
ber
UDINT Serial number (system plug)
6 0x06 Get SysplugOrderNum‐
ber
SHORT_STRING Part number (system plug)
7 0x07 Get FirmwareVersion SHORT_STRING Current firmware version (CPU A)
8 0x08 Get CurrentCon‐
f
igSetVersion
SHORT_STRING Functionality of the configuration
9 0x09 Get HighestCon‐
f
igSetVersion
SHORT_STRING Functionality of the device
10 0x0A Get Reserved USINT Reserved
11 0x0B Get Device Status USINT Device status
•
0: unclear device status
•
1: device start
•
2: service mode (e.g. firmware update,
optics cover calibration)
•
3: normal operation
•
4: device is waiting (e.g. for communica‐
tion partner or input signal)
•
5: waiting recommended (e.g. contami‐
nation warning)
•
6: waiting required (e.g. configuration
incompatible)
•
7: correctable error (e.g. configuration
error, network error)
•
8: serious error (e.g. contamination
error, configuration error, network error)
12 0x0C Get RequiredUserAc‐
t
ion
UINT Note on troubleshooting
•
Bit 0.0: configure device, verify configu‐
ration
•
Bit 0.1: Test configuration, test device
variant
•
Bit 0.2: check communication partner,
check manipulation
•
Bit 0.3: check input signals, check net‐
work and other connections
•
Bit 0.4: check error messages
•
Bit 0.5: configure device (including net‐
work settings)
•
Bit 0.6: check firmware
•
Bit 0.7: wait a few seconds
Services
•
G
et_Attribute_List
•
Get_Attributes_All
•
Get_Attribute_Single
13 T
ECHNICAL DATA
178
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/15ZT/2019-11-14 | SICK
Subject to change without notice