Siemens CPU 313C Hardware And Installation Guide


S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
A5E00105492-03
9-1
&RPPLVVLRQLQJ

 ,QWKLV&KDSWHU
,QWKLV&KDSWHU
There are notes on commissioning which you should take into account in order to
avoid personal injury or damage to machines.
1RWH
Since your commissioning phase is determined primarily by your application, we
can only offer you general information, without claiming completeness of this topic.
&URVVUHIHUHQFH
Note the information about commissioning provided in the descriptions of your
plant section and equipment.
 &RPPLVVLRQLQJ3URFHGXUH
5HTXLUHPHQWV
To utilize the full functional scope of the CPUs, you require
• STEP 7 V 5.1 + SP 4 and higher for CPUs 31xC, 312, 314, and 316-2 DP
• STEP 7 V 5.2 + SP 1 and higher for CPU 317-2 DP
• S7-300 is installed
• S7-300 is wired
• With networked S7-300:
– MPI/PROFIBUS addresses are configured
– The segments are terminated with active terminating resistors

Siemens CPU 313C Specifications

General

MPI Interface	Yes
Number of digital inputs	24
Number of digital outputs	16
Number of analog inputs	4
Number of analog outputs	2
Supply voltage	24 V DC
High-speed counters	Yes
Bit Operations Execution Time	0.1 µs
Word Operations Execution Time	0.2 µs
Power Consumption	5 W
Dimensions (W x H x D)	40 x 125 x 130 mm
Operating Temperature	0 to 60 °C
Communication Interfaces	MPI
Programming Languages	LAD, FBD, STL
Product type designation	CPU 313C
Weight	490 g