Siemens HiPath 3000 Administration Manual

Startup
A31003-S2010-M100-18-76A9
2-20 OpenStage HFA Family, Administration Manual
inbetriebnahme.fm
Quick Start
Add Options to the New Vendor Class
Next, two options resp. tags will be added to the vendor class. Two passes are needed for this:
in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass,
the DLS address is entered as tag #3.
6. In the DHCP console menu, right-click the DHCP server in question and select Set Pre-
defined Options from the context menu.
>
For DHCP servers on a Windows 2003 Server (pre-SP2):
Windows 2003 Server contains a bug that prevents you from using the DHCP con-
sole to create an option with the ID 1 for a user-defined vendor class. Instead, this
entry must be created with the netsh tool in the command line (DOS shell).
You can use the following command to configure the required option (without error
message) so that it is also appears later in the DHCP console:
netsh dhcp server add optiondef 1 "Optipoint element 001"
STRING 0 vendor=OptiIpPhone comment="Tag 001 for Optipoint"
The value SIEMENS for optiPoint Element 1 can then be re-assigned over the
DHCP console.
This error was corrected in Windows 2003 Server SP2.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English