Siemens HiPath 3000 - Conducting Calls - Enhanced Functions; Speakerphone Mode Usage

inbetriebnahme.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
2-23
Startup
Quick Start
12. Select the Advanced tab. Under Vendor class, select the class that you previously de-
fined (OptiIpPhone) and, under User class, select Default User Class.
Activate the check boxes for the options that you want to assign to the scope (in the exam-
ple, 001 and 003)
13. The DHCP console now shows the information that will be transmitted for the correspond-
ing workpoints. Information from the Standard vendor is transmitted to all clients, whereas
information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in
this vendor class.