Alphabetical Reference
72
• Consecutive good packets [in packets]: the good packets in succession
between two bad packets will be counted. If the number of counted
packets is less than the specified value, the threshold will be
exceeded.
– Valid values: 1 ... 255
– Default value  Page 109.
 Page 64
Create Program
• Only on optiPoint 410/420 standard/advance in conjunction with a
display
module or application module.
• Once all required parameters have been entered, you can start to
create the program here.
 Page 57
C-TC TLS port
• This entry is only available in the local telephone menu if TLS has been
selected for
 Transport Base/Transport mode.
• Enter the C-TC TLS port number.
• Default value: 4061
 Page 28  Page 65
Daylight Saving
• This entry is only required if you selected "SNTP" in the  Time Source
field.
• Activate this field if you want the clock on your telephone to
automatically switch between daylight saving and standard time.
 Page 67
Debug Interface
• Only required for development. However, this function can be used for
debugging customer systems in an emergency.
• If this field is activated, the Windriver Tornado debugger makes contact
with the telephone and allows the software to be debugged.
 Page 66
To Next Page
Loading...
