Siemens Hipath 5000 - Page 75

Alphabetical Reference
75
External Access Code
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Specify the number that must be prefixed to access an external
telephone number, e.g. "0".
• Canonical format  Page 97.
• Default value  Page 109.
• Number editor in optiPoint 410/420  Page 106.
 Page 56
ENB File Name
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
•If an  ENB server is used, enter the name of the ENB template file
used in conjunction with this server.
• The file must exist in a defined directory on the  FTP server ( FTP
Server Address).
• Default name  Page 109.
• Download file  Action on Submit.
 Page 60
Emergency Number
• Parameter for use in US only.
• Enter the telephone number to be dialed automatically after 1 second.
 Page 65
Factory Reset Password
• With this function you can reset all administration parameters to the
original settings at the time of delivery.
• Valid values: Alphanumeric
• Minimum length: 6
• Maximum length: 6
• Default value: 124816
 Page 41  Page 31  Page 55
FTP Account Name
• Minimum length: 1 character
• Maximum length: 24 characters
• Default value  Page 109.
 Page 60
FTP Password
• Enter the password defined in the  FTP server as a password for
accessing this server.
Resetting can lead to the failure of all functions of the optiPoint 410/
420. Ensure that you have all the information necessary for the
startup
 Page 15.