Siemens Hipath 5000 - Page 83

Alphabetical Reference
83
Local Area Code
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Specify the local area code of your company here, e.g. "89" for Munich.
• Canonical format  Page 97.
• Default value  Page 109.
 Page 56
Local Country Code
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Canonical format  Page 97.
 Page 56
Local District Code
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Specify the number of the local district of your company here, (the
telephone number without the extension number, e.g. "722").
• Canonical format  Page 97.
• Default value  Page 109.
 Page 56
Location Identifier Number
• Enter the number of the telephone stored on the server. The number
is entered automatically into the optiPoint
410/420 and shown on the
display (also called Local ID). If no name is available, the Location
Identifier Number (LIN) is output on the display.
 Page 65
MAC Address
• Displays the  MAC address of a network terminal device (e.g. the
optiPoint 410/420).
 Page 31  Page 54