Siemens Hipath 5000 - Page 84

Alphabetical Reference
84
MIB-II Error Count
• Displays the number of error messages according to  MIB.
• The used MIB objects are:
 Page 59
Minimum Session Length
• If a session exists (e. g. a call connection) for less than this minimum
time, then no QoS report is sent.
• Default value  Page 109.
 Page 64
National Dial Prefix
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display
module or application module is used.
• Canonical format  Page 97.
 Page 56
NETBOOT File Name
• Enter the file name of the Netboot software.
• The file must be available on the  FTP server in a defined folder
( FTP Server Address).
 Page 60
NetBoot Version
• Version number of the Netboot software.
 Page 54
Non-Compressing Codec Threshold Values
•Non-packed  Codec.
• Explanation  Page 71.
 Page 64
Observation Interval
• It is checked for each observation interval whether the threshold has
been exceeded.
• Default value  Page 109.
 Page 64
MIB Objects Explanation
ifInDiscards Discarded ingoing packets
iflnErrors Non-valid ingoing packets
ifOutDiscards Discarded outgoing packets
ifOutErrors Non-valid outgoing packets