Siemens LME7 Series User Manual

103/106
Building Technologies Basic Documentation LME7... CC1P7105en
15 Operation via internal LED 17.04.2018
15.8.1 Errors during the restore process
Alternately with
or with
or with
Display shows alternately rSt and Er1, Er2 or Er3.
For meaning of a possible cause, see chapter Error code list
with operation via internal LED.
Β
Note:
During the restore process, all settings and parameters are written from the program module to
the basic unit’s onboard memory. In the process, it is possible that previous program
sequences, parameters and settings in the onboard memory will be overwritten!
15.8.2 Reset
nfo
>1 s
LCD Bild 02/0908
When pressing
nfo
for 1...3 seconds, OFF is displayed.
When the button is released, the basic unit is reset.
Β
Note:
For meaning of the error and diagnostic codes, see chapter Error code list...

Siemens LME7 Series Specifications

General

Brand	Siemens
Model	LME7 Series
Category	Controller
Language	English