Siemens LME7 Series - Entering the Password

69/106
Building Technologies Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 17.04.2018
13.8.1 Entering the password
Β
Note!
The OEM password must consist of 5 characters, that for the heating engineer of
4 characters.
VSD
A
F
>1 s
P
Vh
min
s%
Bild42/0707
Press button combination
VSD
A
F
to display
CodE.
When releasing the buttons, 6 bars appear the
first of which blinks.
or
Press or to select a numeral or letter.
/reset
or
Press
/reset
to confirm the entry.
The value entered changes to a
minus sign (–).
The next bar starts blinking.
/reset
or
Press or to select a numeral or letter.
/reset
After entry of the last character, the password
must be confirmed by pressing
/reset
.
Press
/reset
again to finish entry of the
password.
Example: Password consisting of 4
characters.