14/106
Building Technologies Basic Documentation LME7... CC1P7105enr
1 Safety notes 17.04.2018
1.7 Lifetime
Burner controls have a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field). This lifetime is based on the
endurance tests specified in standard EN 298 and the table containing the relevant test
documentation as published by the European Association of Component Manufacturers
(Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer’s Data Sheet and Basic Documentation. After reaching the designed
lifetime in terms of the number of burner startup cycles, or the respective time of usage,
the burner control is to be replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
1.8 Disposal notes
The unit contains electrical and electronic components and must not be disposed of
together with domestic waste. Local and currently valid legislation must be observed.
To Next Page
Loading...
Need help?
General
