71/106
Building Technologies Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 17.04.2018
13.8.2 Changing the heating engineer's password
Β
Note:
For the OEM to change the heating engineer’s password, c: demands entry of the OEM
password!
>1 s
Press button combination
to display
000: Int.
Pressing the
button takes you to parameter
041 heating engineer's password.
Parameter 041: blinks.
Press
to go to level c: for password
changes.
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the
password and enter the former password.
After entry of the last character, the password
must be confirmed by pressing
.
Letter n: for new appears blinking.
Proceed as described in section Entering the
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
.
Letter r: for repeat appears blinking.
Proceed as described in section Entering the
password and repeat entry of the new password.
After entry of the last character, the password
must be confirmed by pressing
.
7782z98/0416
SEt confirms that the new password has been
saved.