Siemens LME7 Series - Identification of Burner

63/106
Building Technologies Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 17.04.2018
13.6.2.3. Identification of burner
P
Vh
min
s%
Bild32/0707
On the left, parameter 113: is displayed blinking.
On the right, ._._ appears.
Example: 113: ._._
/reset
1…3 s
P
Vh
min
s%
Bild33/0707
Press
/reset
for 1…3 seconds to display the
burner’s identification.
Factory setting: - - - - - - - -
Example: 3
P
Vhmins%
Bild162/1107
burnEr Id can only be changed with the ACS410
PC software diagnostic tool.
/reset
or
ESC
P
Vh
min
s%
Bild32/0707
Press
/reset
or
ESC
to return to the display of
parameters.
To the next parameter
Back to the previous
parameter