Siemens LME7 Series - Display of Info Values; Identification Date; Identification Number

62/106
Building Technologies Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 17.04.2018
13.6.2 Display of info values
13.6.2.1. Identification date
The identification date described below corresponds to the creation date for the
program sequence and cannot be changed by the user.
P
Vh
mins%
Bild29/0707
On the left, parameter 102: is displayed blinking.
On the right, ._._ is displayed.
Example: 102: ._._
/reset
1…3 s
P
Vh
min
s%
Bild30/0707
Pressing the
/reset
button (1…3 seconds) and
releasing it when ._._ flashes displays the
identification date (creation date of the program
sequence), DD.MM.YY.
Example: Identification date 03.11.05
/reset
or
ESC
P
Vh
mins%
Bild29/0707
Press
/reset
or
ESC
to return to the display of
parameters.
To the next parameter
13.6.2.2. Identification number
P
V
h
min
s%
Bild31/0707
On the left, parameter 103: is displayed blinking.
On the right, identification number 0 appears.
Example: 103: 0
To the next parameter
or
/reset
for <1 s
Back to the previous
parameter