Siemens LME7 Series - Backup

74/106
Building Technologies Basic Documentation LME7... CC1P7105en
13 Operation via AZL2 17.04.2018
13.8.4 Backup
Parameter 000: blinks.
Display: Parameter 000: blinks, display Int does not
/reset
Press
/reset
for parameter group 041.
Display: Parameter 041: blinks, display ._._ does not
Press for parameter 060.
Display: Parameter 060. blinks, index 00: and value 0 do
not
/reset
Press
/reset
for parameter rEStorE.
Display: Parameter rEStorE blinks
Press for parameter bAC_UP.
Display: Parameter bAC_UP blinks
/reset
Press
/reset
for the backup process.
Display: Value 0
Press to shift the value to change mode one place to
the left.
Display: Value 0 blinks
Note:
To identify display faults, the value changes one place to
the left.