Siemens LOGO! CMK2000 - Page 19

System overview
3.4 System requirements
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
19
Differences between the EIB module and CMK2000
The following table provides an overview of the differences in the performance features of
the EIB module and the CMK2000:
Performance feature
EIB module
CMK2000
Comment
2-bit solar protection
function
- ✓ -
2-bit dimmer function - ✓ -
Adjustable dimming
speed
✓ Fixed dimming speed
100%
-
4-byte integer support
-
✓
-
4-byte float value
support
✓ - -
Access to variable
memory
- ✓ -
Freely definable chan-
nels
50 "predefined" chan-
nels (4/8/12/16/20) clas-
sification
50 freely definable chan-
nels
-
Direct access to in-
puts/outputs
✓ Only direct read access
possible
User solution:
Use of flags/variable
memory in the
LOGO Soft Comfort
program
Minimum monoflop
time
10 ms 30 ms -
Maximum monoflop
time
255 ms 2500 ms -
Percentage and float-
ing functions
Predefined value per
interpolation value
2 freely definable interpo-
lation values
-
Number of analog
values
Max. 10 analog values,
of which only 2 can be
used as outputs
50 analog values are
possible
-
Status display via web
interface
- ✓ -
Updating of operating
software via KNX and
web interface
- ✓ -
Connection to LOGO! Connection via back-
plane bus
Connection to LOGO! over
Ethernet
-
Communication Connection via back-
plane bus
Communication via Ether-
net
-
Transfer of the bus
state can be activat-
ed/deactivated
-
(Transfer of bus state
always to input I24 and
always active)
✓ -
Transfer of the bus
state
Transfer of bus state
always to input I24 and
always active
Activation of transfer of
the bus state reduces the
number of available chan-
nels by 1
-