Siemens MOBILETT Plus HP - Replacing the Motor Unit

Motor drive units 11 - 5
Siemens AG SPR8-220.061.03 Page 5 of 8 MOBILETT Plus HP
Medical Solutions Rev. 03 09.03 CS PS 24
Replacing the motor unit 11
• Remove the side and front covers.
• Remove the motor power unit (D102) or battery charger (D201) depending on the side
where the motor is being replaced. Refer to (Fig. 7) for electrical connections.
• Tilt the unit and support the affected side with a block of wood.
Fig. 7 Motor power unit, electrical connections
Fig. 8 Removing wheel and motor
Equipment required: Ratchet with Allen socket
MOB00477
Battery (K202)
Motor control
buttons (K106)
Battery indicator
Left motor
Right motor
Power supply
Power supply
(K203)
Motor power
unit (D102)
(K104)
(K102)
(K101)
Battery charger
(D201)
(K201)
MOB00480