General 1 - 3
Siemens AG SPR8-220.061.03 Page 3 of 6 MOBILETT Plus HP
Medical Solutions Rev. 03 09.03 CS PS 24
Safety information and protective measures 1
• The following items must be complied with when performing
service work and tests:
- The product-specific safety information in the documents
- The general safety information contained in ARTD Part 2.
• Connect the MOBILETT Plus HP only to a mains power supply
outlet (receptacle) that corresponds to the installation
requirements of VDE 0107 or to country-specific regulations.
• Remove or install boards only when the generator is switched
OFF. Adhere to the ESD guidelines .
• Checks and adjustments performed with radiation ON are
identified by the radiation warning symbol . Radiation
protective clothing must be worn for this type of adjustment.
CAUTION
To Next Page
Loading...
Need help?
General
