Siemens MOBILETT Plus HP - Page 120

126 pages

To Next Page

To Previous Page

MOBILETT Plus HP SPR8-220.061.03 Page 8 of 8 Siemens AG

Rev. 03 09.03 CS PS 24 Medical Solutions

11 - 8 Motor drive units

This page intentionally left blank.

Main Page

Table of Contents3
Training of Customer Support Engineers7
Text Emphasis7
Symbols7
Required Documents8
Required Tools, Measurement and Auxiliary Devices8
Lubricants8
Safety Information and Protective Measures9
Protective Measures Batteries B10 and Capacitors in Power Conversion Unit M10 and M1110
Monitoring the Kv and Ma Values32
Entering Service Mode39
Selecting Test Programs with the Kv+/- Buttons39
Error Messages in Service Mode39
List of Test Programs Available in Service Mode40
- P01 - Filament Test40
- P02 - Rotation Test40
- P03 - Capacitor Bank and Charging Test41
- P04 - Display, LED and Buzzer Test42
- P06 - Capacitor Formation42
- P07 - Query Filament Values from the Battery-Backed RAM43
- P08 - Display the Message History43
- P09 - Clear the Message History44
- P10 - Fast Adaptation44
- P11 - Backup Battery Test45
- P14 - Number of Kv Steps and Upper Kv Limit45
- P15 - Upper Mas Limit46
- P16 - Show the Exposure Counter46
Tests and Measurements in the High Voltage Circuit47
Malfunction in the Inverter or Single Tank48
Pull out Power Conversion Unit M1059
Exchange of Fuse U30162
Exchange of Capacitors of M1062
Exchange of Voltage Divider Board D31062
Exchange of Fuse U1163
Exchange of Capacitor Bank M1163
Exchange of Capacitors of M1163
Exchange of Booster Assembly D30164
Replacement of Batteries B1064
Replacement of Battery Charger Board D20165
Replacement of Battery Indicator D21066
Replacing the Backup Battery67
Replacement of Mains Cable/Cable Winder69
Replacement of Main Switch Element73
Replacing the Collimator Lamp75
- Checking the Light Intensity76
- Light Field Relative to the X-Ray Field77
Replacing the Collimator78
- Checking the Light Intensity81
- Light Field Relative to the X-Ray Field82
Adjusting the Arm System85
- Parallelism85
- Counterbalance87
- Adjusting the Friction Linings88
Replacing the Spring Pack91
Adjustment and Replacement of the Turn Plate95
Replacement of the Single Tank97
Replacement of the Support Arm Cable Harness101
Adjustment of the Hand/Parking Brake105
Replacing the Supporting Wheels108
Replacing the Friction Linings109
- Replacing the Horizontal Friction Lining109
- Replacing the Vertical Friction Linings110
Adjustment of the Speed113
Replacement of the Transmission Belt and Belt Tension Adjustment114
- Belt Replacement114
- Tension Adjustment115
Replacing the Motor Unit117
Repairs to the Motor Power Unit118
- Exchange of Motor Power Unit D102118
- Replacement of Fuse (4 A)119
Recalibration of DAP Measuring System121
- Required Equipment121
- Recalibration Procedure121
Miscellaneous Service Issues123

Siemens MOBILETT Plus HP - Page 120

Table of Contents

Other manuals for Siemens MOBILETT Plus HP

Related product manuals