OpenScape Voice functions
113
Step by step
One-way Intercom
From your phone, you can directly call any team mem-
ber whose telephone has a loudspeaker.
One-way Intercom with variable input of member
number
^ Lift the handset.
j Enter the code for One-way Intercom (see code table
page 117) followed by the one or two-digit member
number of the respective team member.
Z As soon as the connection has been established, you
will hear a confirmation tone and can speak to the other
party via the loudspeaker.
] To end the call, simply hang up.
One-way Intercom to a saved member number
Prerequisite: The code for One-way Intercom and the
member number are programmed on a sensor key.
S Press the programmed sensor key. A connection to that
member's loudspeaker will immediately be estab-
lished: You can speak to the destination caller via your
speakerphone.
Two-way Intercom (not for OpenStage 20 E)
From your phone, you can directly call any team mem-
ber whose telephone has a speakerphone function. The
loudspeaker and microphone of the destination phone
are switched on automatically.
Two-way Intercom with variable input of member
number
n Press the key to use your speakerphone function.
j Enter the code for Two-way Intercom (see code table
page 117) followed by the one or two-digit member
number of the respective team member.
Z As soon as the connection has been established, you
will hear a confirmation tone and can reach the destina-
tion caller via this caller's speakerphone function.
To Next Page
Loading...
