Step by step
Call recording
136
Enhanced functions:
1. A conference
1
can be set up or cleared down during
recording.
2. A consultation can be performed during recording.
3. Call transfer is also available during recording.
4. A second call can be accepted during recording.
The following features are not supported:
1. Playing back recordings over the telephone.
2. Deleting recordings over the telephone.
3. Functions for editing recordings over the telephone.
Recording tips
You will receive the following advisories while a call is
being recorded:
• The recording symbol | on the display
(permanent)
• Beep (repeated at intervals for you and your call
partner)
• Beep (single at the start of recording for you and
your call partner)
The audible advisory can also be switched off. Please
check with the relevant administrator.
Recording calls
Using voice recording
The recording function can be used in a similar way to a
recorder, for example for recording music. The recorder
can be:
• switched on (standby .)
• switched off or stopped (~)
•started (/)
• paused (@)
The symbols used here by way of example can be found
on practically any hardware and software recorder.
1. Server-based conference only
To Next Page
Loading...
Need help?
General