Call recording
137
Step by step
Automatic call recording
This is the simplest mode. If you have accepted a call or
called a subscriber and the subscriber answers, the call
is recorded automatically. Refer to page 135 to check
which calls this can be.
As soon as the recording starts, you will see the
recording symbol
| and hear a beep (see also
page 136).
You cannot pause the recording manually in this mode.
Manual call recording
Activating or deactivating call recording when the
telephone is in idle mode.
Prerequisite: Manual mode is selected.
Select the option shown in the telephone's context
menu to enable the option.
or disable the option.
Call recording with AutoStart
Standby mode is activated in principle in idle mode. You
cannot switch off the recorder. As soon as a call is set
up, call recording starts automatically.
^ Lift the handset.
or
n Press the key shown.
[ The station answers. You hear a beep and the recording
symbol
| is shown on the display. The call is now
being recorded (see also page 136)
You can pause the recording at any time and continue it
again.
] or n If you end the call, the AutoStart process is set up again
for the next call.
Recording on?
f
Recording off? f
To Next Page
Loading...
Need help?
General