Step by Step
Customizing the Telephone
100
Resetting Ringer Settings
In case of a MultiLine telephone you can reset the ring-
er (tone sequence and melody) and volume to the fac-
tory default either individually or for all lines set up.
Prerequisite: You are in the "Audio Settings" menu
page 97.
> : Select and confirm.
For all Lines
: Confirm. All settings are reset.
For a Specific Line
Prerequisite: You have previously selected a setting
different from the factory default for this line.
> : Select and confirm.
Press the desired line key. The number or name of the
line and the current setting are displayed.
> : Select and confirm. The setting is reset to the factory
default.
Handset Volume
You can adjust the handset volume as follows:
Prerequisite: You are in the "Audio Settings"
page 97.
> : Select and confirm. The current setting is displayed.
The value can be increased or reduced by using either
uv the control keys on the telephone or
<> the arrow keys or
o e to l the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
10=Line Specific Ringer? >
!=Reset All? >
2=Change? >
3=Reset? >
05=Handset vol.? >
>
To Next Page
Loading...
