Siemens OptiPoint 410 - Existing Connection; Placing a call on hold manually

Operating the Telephone with the Display
59
Step by Step
Existing Connection
The following options are available when you answer a
call on a line (see  page 58):
• Use the line in the same way as a single-line tele-
phone.
• Place the line on hold manually.
Using the line in the same way as a single-line tele-
phone
Example:
: If you have answered the call on one line, you can now
use all of the functions that are available for a call on a
single-line telephone:
• Place the call on consultation hold and pick it up on
another phone
• Transfer the call (see  page 29)
• Consult with another party (see  page 36)
• Pick up a waiting call (see  page 26)
• Alternate between two calls (see  page 37)
• Join a conference call (see  page 38)
Placing a call on hold manually
You can put an active call on hold using the line key.
Press the illuminated line key.
: Confirm.
Only the two following options are available:
• Press the line key to reconnect the call.
• Press another line key to call another party for
example.
Consultation? >
Line
Holding? >
Line
Line