Web Interface
180
Alphabetic Reference
This glossary provides basic information required for performing configura-
tion tasks on the optiPoint 410/420 economy/economy plus/
standard S V6.0.
• The section "Alphabetic Reference" explains terms found in the menus
in alphabetic order.
• Clicking the icons will bring you to the relevant function descriptions:
– Using the icons on the optiPoint 410/420 economy/economy plus/
standard S V6.0
– Using the icons via the web interface
Append Codes
Append codes are control functions that are accepted at any position with-
in the repertory dialing sequence.
The following options are available for selection:
page 176 page 92
Auto-Dial Timer
Timeslot (in seconds) between the last digit input and the start of the dial-
ing procedure.
• Minimum value: 1
• Maximum value: 8
• Default value: 6
page 178 page 73
Call Forwarding Locked Destination
Enter the destination to which calls are to be forwarded when the tele-
phone is locked (see also page 183).
page 178
Function Status Indication
OK Any characters following this function are sent im-
mediately as DTMF signals after the call has been
answered.
Clear Clear the current call at this point.
Consult Establish a consultation call at this point.
Pause Any characters following this function are sent af-
ter three seconds.
To Next Page
Loading...
