Customizing the Telephone
101
Step by Step
Headset Volume
You can adjust the volume of the headset loudspeaker
as follows:
Prerequisite: You are in the "Audio Settings" page 97
menu.
> : Select and confirm. The current setting is displayed.
The value can be increased or reduced by using either
uv the control keys on the telephone or
<> the arrow keys or
o e to l the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
Room Acoustics
The room acoustics for the handsfree talking equip-
ment can be adapted to the room conditions with this
setting. Settings for normal, echoing or muffled rooms
are available for selection.
Prerequisite: You are in the "Audio Settings" page 97
menu.
> : Select and confirm. The current setting is displayed, for
example "Normal".
> : Select and confirm another setting. The new setting is
displayed
Setting Room Character During a Call
If you are talking in "handsfree" mode (not with
optiPoint 410/420 economy/economy plus), you can
only adjust the room character only if you have assigned
the functions "2=Echoing" and "3=Muffled" to function
keys. Please read the section "Using Function Keys
Menu" in the chapter "Customizing the Telephone" on
page 90.
optiPoint 410/420 economy does not have a
headset interface.
8=Headset vol.? >
>
6=Room character? >
2=Echoing? >
To Next Page
Loading...
