Operating the Telephone with the optiPoint display module
123
Step by Step
Repertory Dialing
With repertory dialing, you can enter dial control func-
tions at any point in the repertory dialing sequence.
HiPath 8000 automatically detects whether the digits
represent an IP address, a number, or a URL.
For information on programming a repdial key see
page 92.
Control
Function
Action During Dialing
OK Any characters following this control func-
tion are sent immediately after the call has
been answered, and are sent as DTMF.
Pause Waits 3 seconds before sending any char-
acters following this control function.
Consult Establish a consultation call at this point.
Clear Clear the current call at this point.
To Next Page
Loading...
