Step by Step
Customizing the Telephone
90
Assigning Function Keys
The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 features a number of functions which you
can assign to function keys as required.
You will find an overview of the options from
page 191.
The optiPoint 410/420 economy/economy plus/stan-
dard S V6.0 is equipped with 12 function keys all of
which are user-programmable on two levels.
Five of these keys are preassigned on the first level.
These keys are listed and illustrated on page 19.
Even these five preassigned keys can be repro-
grammed.
If possible, do not change the Cancel and Shift keys.
These enable you to cancel procedures and/or program
shifted keys.
The optiPoint 420 or
optiPoint self labeling key module provide an elec-
tronic self-labelling function for programming keys.
The programming procedure using the telephone menu
is described below with examples. However, you can
also program keys using the web interface
( page 171).
The possibility of programming a key may be
blocked by your service personnel. In this case
you get the message "Locked by administrator" if
you try to assign a function to this key.
To Next Page
Loading...
