Step by Step
Operating the Telephone with the optiPoint display module
104
Operating the Telephone with the
optiPoint display module
Using the Display
To select the control elements on the display, use the
stylus provided or a similar object that will not damage
the display surface.
Please read the instructions on page 168.
Call View Start Display
Prerequisite: "Use DSM" is enabled ( page 79) and
the telephone is not locked ( page 88).
When you connect the telephone for the first time or re-
start it a message appears prompting you to press the
display to start Call Control. The idle display appears.
Press the Menu icon to see which menu options are
available when the telephone is in the idle state.
The optiPoint display module can not be connec-
ted to the optiPoint 410/420 economy/
economy plus
Call Control
Mon 07/03/05 11:34AM
+44 123456 78910
Redial Last No.
Do not disturb
Ringer on
Setup
Call Log
Contacts
To Next Page
Loading...
