Siemens OptiPoint 410 - Call Waiting; Call Transfer

Step by Step
Customizing the Telephone
70
Call Waiting
You can use this option to enable call waiting during an
active call.
Prerequisite: You are in the "Configuration" menu
 page 67.
> : Select and confirm.
: Confirm. Second call is permitted.
or
: Confirm. Second caller hears busy signal.
The new setting is displayed.
Call Transfer
Use this menu option to activate/deactivate the feature
for deflecting a current call to another party.
Prerequisite: You are in the "Configuration" menu
 page 67.
> : Select and confirm.
: Confirm. Call can be transferred.
or
: Confirm. Call transfer not permitted.
The new setting is displayed.
This menu option is only available if it has been
activated by the administrator.
08=Call waiting? >
Switch on? >
Switch off? >
This menu option is only available if it has been
activated by the administrator.
09=Call transfer? >
Switch on? >
Switch off? >