Siemens OptiPoint 410 - Dialing Mode; Call Display

Step by Step
Customizing the Telephone
72
Dialing Mode
You can use this option to determine whether only a
number or a number and a name can be entered when
dialing a call destination.
Prerequisite: You are in the "Configuration" menu
 page 67.
> : Select and confirm.
> : Select and confirm. Alphanumeric input.
or
> : Select and confirm. Numeric input.
or.
> : Select and confirm for both options.
Specify which input you prefer.
> : Select alphanumeric input.
> : Select numeric input.
The new setting is displayed.
Call Display
This function allows you to define what kind of caller in-
formation (Calling Line Identification) is displayed for in-
coming calls.
Possible options are:
1=Name
2=Number
4=No display
5=Name and Number
If the appropriate data is not available, the next available
ID is displayed.
Prerequisite: You are in the "Configuration" menu
 page 67.
> : Select and confirm.
> : Select the required option and confirm. The new setting
is displayed.
12=Dialing mode? >
1=Name? >
02=Number? >
3=Name and Number? >
1=Name? >
2=Number? >
Please note that when you select the "No display"
option, no "missed calls", "received calls" or "for-
warded calls" are saved in the Missed Calls list
(see  page 32).
13=Call display? >
1=Name? >