Step by Step
Customizing the Telephone
102
Key Clicks
You can decide whether or not to have key clicks to pro-
vide feedback when a key has been pressed. Three vol-
ume levels are available and can be adjusted as indicat-
ed below.
Key clicks are only audible when the phone is in a call
state. You do not hear key clicks when you configuring
the telephone.
Prerequisite: You are in the "Audio Settings" page 97
menu.
> : Select and confirm. The current setting is displayed.
You can increase or decrease this value with:
uv the control keys on the telephone or
<> the arrow keys or
o e to g the keypad keys.
: Confirm the setting. The new setting is displayed as a
value.
Rollover Volume
You can adapt the volume for rollover as follows:
Prerequisite: You are in the "Audio Settings" menu
page 97.
> : Select and confirm. The current setting is displayed.
You can increase or decrease this value with:
uv the control keys on the telephone, or
<> the arrow keys, or
o e to i the keypad keys.
: Confirm the setting. The value of the new setting is dis-
played.
Please note that the setting for room acoustics is
reset to "1=Normal" if you deactivate the function
keys "2=Echoing" or "3=Muffled".
7=Key click vol.? >
>
9=Rollover Volume? >
>
To Next Page
Loading...
