Customizing the Telephone
99
Step by Step
Ringer
Prerequisite: You are in the "Audio Settings" menu
page 97.
In Case of a SingleLine Telephone
> : Select and confirm. The current setting is displayed.
In Case of a MultiLine Telephone
You can set the ringer (tone sequence and melody) indi-
vidually for every line set up.
> : Select and confirm.
> : Select and confirm.
Press the desired line key. The number or name of the
line and the current ringer setting are displayed.
> : Select and confirm.
Setting
The tone sequence can be varied in 3 steps, the melody
in 8 steps. During programming you may switch be-
tween the tone sequence and melody input fields using
the arrow keys
<
und
>
.
> Use the arrow keys to select the input field for melody
or tone sequence.
o e to i Use the keys 1-5 on the keypad to change the values as
required.
: Confirm to change. The new setting is displayed.
3=Ringer? >
10=Line Specific Ringer? >
2=Change? >
1=Ringer? >
Melody 2 Tone sequ. 1
Melody 3 Tone sequ. 2
To Next Page
Loading...
