Operating the Telephone with the optiPoint display module
169
Step by Step
The keys for the Display Module are used as follows:
D or F Select next control element for activation.
C or E Select previous control element for activation.
: Activate control element by opening a menu at the
same time for example.
Edit Fields
If the activated control element is an edit field, the con-
trol keys must be used as described here – depending
on the input mode selected ( page 165):
D • Overwrite mode: Proceeds with a control element
from the edit field.
• Insert mode: Moves cursor one character to the
right and after the last character, jumps one control
element forward.
C • Overwrite mode: clear key (clears characters in re-
verse starting from the cursor position).
• Insert mode: moves cursor one character to the left
and with the first character, skips back one control
element.
: Confirms input (e.g. for dialing).
E Proceeds to the next control element from the edit
field.
F Returns to the previous control element from the edit
field.
Control Keys on the Telephone
The control keys C and D and the confirm key :
on the telephone have the same function as the corre-
sponding keys on the Display Module ( page 168).
To Next Page
Loading...
