Siemens OptiPoint 410 - Making Calls; Off-Hook Dialing

Step by Step
Operating the Telephone with the optiPoint display module
116
Making Calls
You can dial a telephone number both on and off-hook.
Off-Hook Dialing
n Lift the handset.
or
Press.
o Enter a phone number using the keypad.
or
Enter the number using the display keyboard. (The dis-
play keyboard is described in the operating instructions
for the optiPoint display module).
If you have activated the function Busy when di-
aling (see  page 84), you cannot be interrupt-
ed by an incoming call. The caller hears busy
tone.
Loudspeaker
Call Control
Mon 07/03/05 11:34AM
< Please Dial>
123
Contacts
You can also use phone numbers that are stored
in Contacts ( page 121), in Redial Last No.
( page 137) or in a Call Log ( page 138).