Customizing the Telephone
79
Step by Step
or
> : Select and confirm.
or
> : Select and confirm.
or
> : Select and confirm.
or
> : Select and confirm.
or
> : Select and confirm.
Display Module Call View
This function is only available if an optiPoint 410 display
module has been connected to your optiPoint 410/420
standard. You can use this option to specify whether
call view is on the telephone display or on the optiPoint
display module following a system restart.
Prerequisite: You are in the "Configuration" menu
page 67.
> : Select and confirm.
: Confirm. Call view appears on the optiPoint display
module.
or
: Confirm. Call view appears on the telephone display.
The new setting is displayed.
3=1 minute? >
4=2 minutes? >
5=5 minutes? >
6=10 minutes? >
7=15 minutes? >
39=DSM call view? >
Switch on? >
Switch off? >
To Next Page
Loading...
