Operating the Telephone with the optiPoint display module
151
Step by Step
View Line
Press the View Line Box (see page 148); the display
switches to Call Control as shown in the figure below:
If a call is coming in on the prime line, the display
switches immediately to Call Control without you hav-
ing to press the View Line Box beforehand.
You now have the following options:
• Answer the call
• Deflect the call
• Transfer the call
If a call comes in on the selected line in idle mode
(e.g. Store) with a ring or call waiting signal, Call Control
is displayed as illustrated above.
Manager
Mon 07/03/05
Incoming Call
Bill Smith
987654321
To Next Page
Loading...
