Operating the Telephone with the optiPoint display module
159
Step by Step
Answering a Call on Another Line
Prerequisite: The Show interline state function must
be activated (see page 81).
An incoming call on another line in Call Control (Ringer
or Call Waiting signal) is displayed in a line information
box.
Consequently, the line informatiton box has the same
function as the line control keys in the line overview. In
this example, an incoming call is ringing on a Manager
line.
Secretary
Mon 07/03/05 11:34AM
00:24
Bill Smith
987654321
Jill Hill
Manager
Consult/Transfer
To Next Page
Loading...
