Web Interface
173
Call up the user interface
User Click here to access the user area.
Enter the user ID for the optiPoint 410/420 economy/economy plus/
standard S V6.0 telephone (maximum length: 24) and click "Login". If a
user ID has not been specified, enter the default value "000000".
The administrator can set a minimum length (between 6 and 24 char-
acters) for the user password. If the minimum length was changed
in the meantime so that your password is too short now, you are
asked to change your password ( page 174). Only after you have
changed your password you can log on to the user interface.
To Next Page
Loading...
