Installation
5.2 Installing a switch
SCALANCE X-300
108 Operating Instructions, 10/2010, A5E01113043-10
Figure 5-4 Rack mounting of two IE-Switches X-300EEC fastened together
Figure at top: Rear of the switches
Figure at bottom: View from below
Table 5- 2 Legend for rack mounting of two IE-Switches X-300EEC fastened together
No. Name
1 Plate for side
2 Spring washer
3 Hexagonal nut
5 Side section (the side panel should be under slight tension)
7 IE Switch X-300EEC
5.2.6 19" rack mounting - XR-300M EEC product group
WARNING
Use of approved components
Use only approved 19" cabinets.
Use only supplied mounting brackets.
There are several ways of fixing the mounting brackets depending on the mounting
position required.
To Next Page
Loading...
