Siemens SCALANCE X-300 Series

Approvals, certificates, standards
9.9 Product group SFP
SCALANCE X-300
246 Operating Instructions, 10/2010, A5E01113043-10
9.9.4 SFP FDA and IEC approvals
The following devices meet the FDA and IEC requirements listed below:
Product line Product
group
Device:
Transceiver
(Variant) Fulfills FDA and IEC
requirements
SFP991-1 (1 x 100 Mbps, LC port optical,
multimode glass, up to max. 3
km)
●
SFP991-1LD (1 x 100 Mbps, LC port optical,
single mode glass, up to max.
26 km)
●
SFP991-1LH+ (1 x 100 Mbps, LC port optical,
single mode glass, up to max.
70km)
●
SFP992-1 (1 x 1000 Mbps, LC port
optical, multimode glass, up to
max. 750m)
●
SFP992-1LD (1 x 1000 Mbps, LC port
optical, single mode glass, up
to max. 10km)
●
SFP992-1LH (1 x 1000 Mbps, LC port
optical, single mode glass, up
to max. 40km)
●
SFP992-LH+ (1 x 1000 Mbps, LC port
optical, single mode glass, up
to max. 70km)
●
X-300 SFP
SFP992-1ELH (1 x 1000 Mbps, LC port
optical, single mode glass, up
to max. 120km)
●
&RPSOLHVZLWK&)5
DQG
&/$66/$6(5352'8&7
)'$
,(&
Figure 9-10 FDA and IEC approvals
9.9.5 Overview of the SFP approvals
Note
The SFP transceivers only have UL60950, C-Tick, CE, FM and ATEX approvals.
The other approvals are device approvals and are obtained for the device with the various
components.