Installation
5.3 Inserting media modules and SFP transceivers
SCALANCE X-300
Operating Instructions, 10/2010, A5E01113043-10
119
4. The SFP can be heard to lock in place and is therefore
firmly secured.
5. Plug the connecting cable into the SFP.
The connecting cable can be heard to lock in place and
is then firmly secured.
Removing an SFP
1. Remove the cable connected to the SFP.
2. Open the clip on the SFP and remove the SFP from the SFP media module.
Notice: It must be possible to remove the SFP easy without using force.
3. Fit a blind plug to the SFP.
To Next Page
Loading...
