Approvals, certificates, standards
9.6 Product group X-300M PoE
SCALANCE X-300
232 Operating Instructions, 10/2010, A5E01113043-10
Explosion protection directive (ATEX)
The SIMATIC NET product meets the requirements of the EC directive:94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres".
WARNING
When using (installing) SIMATIC NET products in hazardous area zone 2, make absolutely
sure that the associated conditions are adhered to.
"Approval of SIMATIC/ SIMATIC NET Products for Direct Installation in Ex-Zone 2"
You will find this on the Internet on the pages of Siemens Industry Automation Customer
Support under the following entry ID:
"Entry list" tab > entry type "Certificates"
ATEX code:
II 3 G Ex nA II T4
The product meets the requirements of the following standards:
● EN 60079-15: 2005 (electrical apparatus for potentially explosive atmospheres; Type of
protection "n")
● EN 60079-0:2006
FM approval
The product meets the requirements of the following standards:
● Factory Mutual Approval Standard Class Number 3611
Notice for Australia (C-Tick)
The product meets the requirements of the AS/NZS 2064 standard (Class A).
CSA Approval for Information Technology Equipment
CSA Certification Mark
Canadian Standard Association CSA C22.2 No. 60950-1-03
cULus Approval for Information Technology Equipment
cULus Listed I.T.E.
Underwriters Laboratories Inc. complying with:
● UL 60950-1
● CSA C22.2 No. 60950-1-03
To Next Page
Loading...
