Approvals, certificates, standards
9.8 MM900 product group
SCALANCE X-300
240 Operating Instructions, 10/2010, A5E01113043-10
Explosion protection directive (ATEX)
The SIMATIC NET product meets the requirements of the EC directive:94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres".
WARNING
When using (installing) SIMATIC NET products in hazardous area zone 2, make absolutely
sure that the associated conditions are adhered to:
"Approval of SIMATIC/ SIMATIC NET Products for Direct Installation in Ex-Zone 2"
You will find this on the Internet on the pages of Siemens Industry Automation Customer
Support under the following entry ID:
33118441 (http://support.automation.siemens.
com/WW/view/en/33118441)
"Entry list" tab > Entry type "Certificates"
The SCALANCE MM900 media modules have the following approvals:
NOTICE
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
● EN 60079-15 : 2005
EN 60079-0:2006
II 3 G Ex nA II T...
KEMA 07 ATEX 0145X
● c-UL-us
UL 60950-1 (Information Technology Equipment) CSA C22.2 No. 60950-1
● c-UL-us
UL 508 (Industrial Control Equipment) CSA C22.2 No. 142-M1987
● c-UL-us for Hazardous Location
UL 1604 and 2279-15 (Hazardous Location)
Cl. 1, Div. 2, GP. A, B, C, D, T...
Cl. 1, Zone 2, GP. IIC T...
● FM 3611 Hazardous (Classified) Location Electrical Equipment
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T*
Non Incendive / Class I / Zone 2 / Group IIC / T*
● AS/NZS 2064 (Class A)
(T... / T* = For detailed information on the temperature class, refer to the type plate)
To Next Page
Loading...
Need help?
General