Siemens SIMATIC 505 - SF Header

134 •
••
• 7 - Documentation Simatic 505 SoftShop
SF Header
505 SoftShop provides a simple way to document SF while you are
creating or editing your SF program. The maximum number of
characters you can enter for each header is 16K.
Double-click the SF Header Input icon in the active logic program
window. The Network Header Input dialog box is displayed (see Figure
7.5). Type in your header. Select OK when you're finished.
Figure 7.4
Figure 7.5
To see SF headers in the active logic program, select Program Setup
from the Options menu. Click All Headers in the Logic Editor box and
click OK.