Appendix
A.2 Certificates and approvals
SIMATIC Box PC 627
A-2 Operating Instructions, Release 05/2006, A5E00362052-03
Connecting peripherals
The requirements relating to noise immunity according to EN 61000-6-2:2001 are met when
you connect a peripheral suitable for an industrial environment. Peripheral devices are only
be connected via shielded cables.
A.2 A.2 Certificates and approvals
DIN ISO 9001 certificate
The quality assurance system for the entire product process (development, production, and
marketing) at Siemens fulfills the requirements of ISO 9001 (corresponds to EN29001:
1987).
This has been certified by DQS (the German society for the certification of quality
management systems).
EQ-Net certificate no.: 1323-01
Software License Agreement
The device is shipped with preinstalled software. Please observe the respective license
agreements.
Approvals for the USA, Canada and Australia
Product safety
One of the following markings on a device is indicative of the corresponding approval:
Underwriters Laboratories (UL) per UL 60950-1 (I.T.E) or per UL 508 (IND.CONT.EQ)
Underwriters Laboratories (UL) according to Canadian standard C22.2 No. 60950-1
(I.T.E) or C22.2 No. 142 (IND.CONT.EQ)
Underwriters Laboratories (UL) to Standard UL 60950-1, Report E11 5352 and
Canadian Standard C22.2 no. 60950-1 (I.T.E), or to UL508 and C22.2 no. 142
(IND.CONT.EQ)
UL recognition mark
Canadian Standard Association (CSA) per Standard C22.2. No. 60950-1 (LR 81690) or
per C22.2 No. 142 (LR 63533)
Canadian Standard Association (CSA) to the American Standard UL 60950-1
(LR 81690), or to the UL 508 (LR 63533)
To Next Page
Loading...
