SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
1-1
Introduction
1
1.1 1.1 Preface
Purpose of this document
These operating instructions contain all the information you need for commissioning and
using the SIMATIC Box PC 627.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, additional programming devices), as well as
for service and maintenance personnel who install add-ons or carry out fault/error analyses.
Scope of validity of this document
This documentation applies for all variations of the SIMATIC Box PC 627 and describes the
delivery status as of May 2006.
Its place in the information landscape
The operating instructions are available on the supplied "Documentation and Drivers" CD.
For further instructions on how to handle the software, please refer to the corresponding
manuals.
Conventions
The abbreviation Box PC or device is also used within this documentation for the product
name SIMATIC Box PC 627.
History
Currently released versions of these operating instructions:
Edition Comment
03/2005 First Edition
11/2005
• Eliminating the Error
• Book mounting description
05/2006
• Error correction
• Windows XP Embedded
To Next Page
Loading...
