Siemens Simatic box pc 627b - Installing; Removing the Bus Board

Maintenance and service
11.1 Removing and installing hardware components
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
11-7
11.1.4 Installing / removing the bus board
Preparation
1. Disconnect the device from mains and unplug all cables.
2. Open the device.
Removing the bus board
How to remove the bus board
1 Remove all modules from their slots.
2 Remove the drive bay module for
hard disks and DVD-ROM/CD-RW.
3 Remove the power supply cover:
Unscrew 5 screws (1).
4 Remove the power supply module.
5 Remove the 3 screws (1) on the bus
board.